#include <p18cxxx.h>
#include <ancomp.h>
#if defined (ANCOM_V1)
/*************************************************************************************
Function : void Open_ancomp(unsigned char config)
Overview : This routine configures Reference Voltage level and Comparator module.
Parameters : config - This contains the parameters to be configured in the CVRCON & CMxCON
Registers.
Returns : None
Remarks : This function configures comparator with channel of selection for positive and negetive
input terminals, configures interrupts, reference voltage module is configured based on input
parameters.
***************************************************************************************/
void Open_ancomp(unsigned char config)
{
PIE2bits.CMIE = 0;
CMCON = (0b00111111 & config);
PIR2bits.CMIF = 0;
if(config & 0b10000000)
PIE2bits.CMIE = 1;
//check for Analog IP and OP
config &= 0b00000111;
if(config == 1) {TRISDbits.TRISD1 = 1;TRISDbits.TRISD0 = 1;TRISEbits.TRISE1 = 0;}
else if(config == 2){TRISDbits.TRISD1 = 1;TRISDbits.TRISD0 = 1;TRISDbits.TRISD3 = 1;TRISDbits.TRISD2 = 1;}
else if(config == 3){TRISDbits.TRISD1 = 1;TRISDbits.TRISD0 = 1;TRISEbits.TRISE1 = 0;
TRISDbits.TRISD3 = 1;TRISDbits.TRISD2 = 1;TRISEbits.TRISE2 = 0;}
else if(config == 4){TRISDbits.TRISD1 = 1;TRISDbits.TRISD0 = 1;TRISDbits.TRISD3 = 1;}
else if(config == 5){TRISDbits.TRISD1 = 1;TRISDbits.TRISD0 = 1;TRISEbits.TRISE1 = 0;
TRISDbits.TRISD3 = 1;TRISEbits.TRISE2 = 0;}
else if(config == 6)
{
if(CMCON & 0b00001000)
{TRISDbits.TRISD0 = 1;TRISDbits.TRISD2 = 1;}
else {TRISDbits.TRISD1 = 1;TRISDbits.TRISD3 = 1;}
}
}
#elif defined (ANCOM_V2)
/*************************************************************************************
Function : void Open_ancomp(unsigned char config)
Overview : This routine configures Reference Voltage level and Comparator module.
Parameters : config - This contains the parameters to be configured in the CVRCON & CMxCON
Registers.
Returns : None
Remarks : This function configures comparator with channel of selection for positive and negetive
input terminals, configures interrupts, reference voltage module is configured based on input
parameters.
***************************************************************************************/
void Open_ancomp(unsigned char config)
{
PIE2bits.CMIE = 0;
CMCON = (0b00111111 & config);
PIR2bits.CMIF = 0;
if(config & 0b10000000)
PIE2bits.CMIE = 1;
//check for Analog IP and OP
config &= 0b00000111;
if(config == 1) {TRISFbits.TRISF6 = 1;TRISFbits.TRISF5 = 1;TRISFbits.TRISF2 = 0;}
else if(config == 2){TRISFbits.TRISF6 = 1;TRISFbits.TRISF5 = 1;TRISFbits.TRISF4 = 1;TRISFbits.TRISF3 = 1;}
else if(config == 3){TRISFbits.TRISF6 = 1;TRISFbits.TRISF5 = 1;TRISFbits.TRISF2 = 0;
TRISFbits.TRISF4 = 1;TRISFbits.TRISF3 = 1;TRISFbits.TRISF1 = 0;}
else if(config == 4){TRISFbits.TRISF6 = 1;TRISFbits.TRISF5 = 1;TRISFbits.TRISF4 = 1;}
else if(config == 5){TRISFbits.TRISF6 = 1;TRISFbits.TRISF5 = 1;TRISFbits.TRISF2 = 0;
TRISFbits.TRISF4 = 1;TRISFbits.TRISF1 = 0;}
else if(config == 6)
{
if(CMCON & 0b00001000)
{TRISFbits.TRISF5 = 1;TRISFbits.TRISF3 = 1;}
else {TRISFbits.TRISF6 = 1;TRISFbits.TRISF4 = 1;}
}
}
#elif defined (ANCOM_V3)
/*************************************************************************************
Function : void Open_ancomp(unsigned char config)
Overview : This routine configures Reference Voltage level and Comparator module.
Parameters : config - This contains the parameters to be configured in the CVRCON & CMxCON
Registers.
Returns : None
Remarks : This function configures comparator with channel of selection for positive and negetive
input terminals, configures interrupts, reference voltage module is configured based on input
parameters.
***************************************************************************************/
void Open_ancomp(unsigned char config)
{
PIE2bits.CMIE = 0;
CMCON = (0b00111111 & config);
PIR2bits.CMIF = 0;
if(config & 0b10000000)
PIE2bits.CMIE = 1;
//check for Analog IP and OP
config &= 0b00000111;
if(config == 1) {TRISAbits.TRISA0 = 1;TRISAbits.TRISA3 = 1;TRISAbits.TRISA4 = 0;}
else if(config == 2){TRISAbits.TRISA0 = 1;TRISAbits.TRISA3 = 1;TRISAbits.TRISA1 = 1;TRISAbits.TRISA2 = 1;}
else if(config == 3){TRISAbits.TRISA0 = 1;TRISAbits.TRISA3 = 1;TRISAbits.TRISA4 = 0;
TRISAbits.TRISA1 = 1;TRISAbits.TRISA2 = 1;TRISAbits.TRISA5 = 0;}
else if(config == 4){TRISAbits.TRISA0 = 1;TRISAbits.TRISA3 = 1;TRISAbits.TRISA1 = 1;}
else if(config == 5){TRISAbits.TRISA0 = 1;TRISAbits.TRISA3 = 1;TRISAbits.TRISA4 = 0;
TRISAbits.TRISA1 = 1;TRISAbits.TRISA5 = 0;}
else if(config == 6)
{
if(CMCON & 0b00001000)
{TRISAbits.TRISA3 = 1;TRISAbits.TRISA2 = 1;}
else {TRISAbits.TRISA0 = 1;TRISAbits.TRISA1 = 1;}
}
}
#elif defined (ANCOM_V4)
/*************************************************************************************
Function : void Open_ancomp(unsigned char config)
Overview : This routine configures Reference Voltage level and Comparator module.
Parameters : config - This contains the parameters to be configured in the CVRCON & CMxCON
Registers.
Returns : None
Remarks : This function configures comparator with channel of selection for positive and negetive
input terminals, configures interrupts, reference voltage module is configured based on input
parameters.
***************************************************************************************/
void Open_ancomp(unsigned char config)
{
PIE2bits.CMIE = 0;
CMCON = (0b00111111 & config);
PIR2bits.CMIF = 0;
if(config & 0b10000000)
PIE2bits.CMIE = 1;
//check for Analog IP and OP
config &= 0b00000111;
if(config == 1) {TRISAbits.TRISA0 = 1;TRISAbits.TRISA3 = 1;TRISBbits.TRISB5 = 0;}
else if(config == 2){TRISAbits.TRISA0 = 1;TRISAbits.TRISA3 = 1;TRISAbits.TRISA1 = 1;TRISAbits.TRISA2 = 1;}
else if(config == 3){TRISAbits.TRISA0 = 1;TRISAbits.TRISA3 = 1;TRISBbits.TRISB5 = 0;
TRISAbits.TRISA1 = 1;TRISAbits.TRISA2 = 1;TRISAbits.TRISA5 = 0;}
else if(config == 4){TRISAbits.TRISA0 = 1;TRISAbits.TRISA3 = 1;TRISAbits.TRISA1 = 1;}
else if(config == 5){TRISAbits.TRISA0 = 1;TRISAbits.TRISA3 = 1;TRISBbits.TRISB5 = 0;
TRISAbits.TRISA1 = 1;TRISAbits.TRISA5 = 0;}
else if(config == 6)
{
if(CMCON & 0b00001000)
{TRISAbits.TRISA3 = 1;TRISAbits.TRISA2 = 1;}
else {TRISAbits.TRISA0 = 1;TRISAbits.TRISA1 = 1;}
}
}
//------New comparator module 1 ------------
#elif defined (ANCOM_V5)
/*************************************************************************************
Function : void Open_ancomp1(unsigned char config)
Overview : This routine configures Reference Voltage level and Comparator module.
Parameters : config - This contains the parameters to be configured in the CVRCON & CMxCON
Registers.
Returns : None
Remarks : This function configures comparator with channel of selection for positive and negetive
input terminals, configures interrupts, reference voltage module is configured based on input
parameters.
***************************************************************************************/
void Open_ancomp1(unsigned char config)
{
PIE2bits.C1IE = 0;
CM1CON0 = (0b00111111 & config);
if(config & 0b01000000)
CM2CON1 &= 0b11011111;
else
CM2CON1 |= 0b00100000;
PIR2bits.C1IF = 0;
if(config & 0b10000000)
PIE2bits.C1IE = 1;
//check for Analog IP and OP
config &= 0b0000
PIC18单片机 官方示例所有程序 包含AD TIMER0123 USART 等
5星 · 超过95%的资源 需积分: 50 177 浏览量
2018-04-04
18:27:53
上传
评论 1
收藏 256KB RAR 举报 
PIC18单片机 官方示例所有程序 包含AD TIMER0123 USART 等 （451个子文件） 
open_ancomp.c 32KB caninit.c 17KB adcopen.c 10KB cp2open.c 9KB wrtsspi.c 9KB PMPOpen.c 8KB close_ancomp.c 8KB spi_open.c 7KB ew1setoc.c 7KB WriteBlockFlash.c 6KB WriteBytesFlash.c 6KB pw2open.c 6KB spi1open.c 6KB spi2open.c 5KB pw1setoc.c 5KB cm2open.c 5KB canread.c 5KB u1open.c 5KB u2open.c 5KB sw_uart.c 5KB ew3setoc.c 5KB OpenCTMU.c 4KB ew2setoc.c 4KB ew1open.c 4KB canwritx.c 4KB pw1open.c 4KB ep2open.c 4KB t3open.c 4KB uopen.c 4KB ep3open.c 4KB i2c2eerr.c 4KB cp1open.c 4KB i2c_puts.c 4KB canfmx.c 4KB canfms.c 4KB i2c2eesr.c 4KB pw4open.c 4KB i2c1eerr.c 4KB i2c1eesr.c 4KB cp4open.c 3KB i2c_eerr.c 3KB RtccWriteTimeDate.c 3KB pw5open.c 3KB pw2setoc.c 3KB rb1open.c 3KB RtccWriteDate.c 3KB i2c_eesr.c 3KB openxlcd.c 3KB cp5open.c 3KB RtccWriteTime.c 3KB ismclr.c 3KB ep1open.c 3KB adcselchconv.c 3KB mw_read.c 3KB i2c2eebw.c 3KB canwrits.c 3KB setcgram.c 3KB EraseFlash.c 3KB WriteWordFlash.c 3KB em1open.c 3KB i2c2eepw.c 3KB setddram.c 3KB ew2open.c 3KB adcbusy.c 3KB rb2open.c 3KB em2open.c 3KB i2c1eebw.c 3KB mw_gets.c 3KB i2c2puts.c 3KB pw3setoc.c 3KB canfilts.c 3KB i2c_eebw.c 3KB i2c1eepw.c 3KB readaddr.c 3KB canloadx.c 3KB rb0open.c 3KB t1open.c 3KB writdata.c 3KB i2c2eeap.c 3KB em3open.c 3KB i2c_eepw.c 3KB swptci2c.c 3KB i2c2eecr.c 3KB ew3open.c 3KB CANLrtrX.c 3KB readdata.c 3KB pw3open.c 3KB canfiltx.c 3KB DeepSleepWakeUpSource.c 3KB ep1read.c 3KB canerrst.c 2KB cp2read.c 2KB i2c1puts.c 2KB busyxlcd.c 2KB wcmdxlcd.c 2KB i2c1eecr.c 2KB adcclose.c 2KB RtccWriteAlrmDate.c 2KB cp4read.c 2KB cp5read.c 2KB共 451 条
- 1
- 2
- 3
- 4
- 5
资源评论
MaksimLV2018-12-19新手上路，学习学习
