# HIREDIS
Hiredis is a minimalistic C client library for the [Redis](http://redis.io/) database.
It is minimalistic because it just adds minimal support for the protocol, but
at the same time it uses an high level printf-alike API in order to make it
much higher level than otherwise suggested by its minimal code base and the
lack of explicit bindings for every Redis command.
Apart from supporting sending commands and receiving replies, it comes with
a reply parser that is decoupled from the I/O layer. It
is a stream parser designed for easy reusability, which can for instance be used
in higher level language bindings for efficient reply parsing.
Hiredis only supports the binary-safe Redis protocol, so you can use it with any
Redis version >= 1.2.0.
The library comes with multiple APIs. There is the
*synchronous API*, the *asynchronous API* and the *reply parsing API*.
## UPGRADING
Version 0.9.0 is a major overhaul of hiredis in every aspect. However, upgrading existing
code using hiredis should not be a big pain. The key thing to keep in mind when
upgrading is that hiredis >= 0.9.0 uses a `redisContext*` to keep state, in contrast to
the stateless 0.0.1 that only has a file descriptor to work with.
## Synchronous API
To consume the synchronous API, there are only a few function calls that need to be introduced:
redisContext *redisConnect(const char *ip, int port);
void *redisCommand(redisContext *c, const char *format, ...);
void freeReplyObject(void *reply);
### Connecting
The function `redisConnect` is used to create a so-called `redisContext`. The
context is where Hiredis holds state for a connection. The `redisContext`
struct has an integer `err` field that is non-zero when an the connection is in
an error state. The field `errstr` will contain a string with a description of
the error. More information on errors can be found in the **Errors** section.
After trying to connect to Redis using `redisConnect` you should
check the `err` field to see if establishing the connection was successful:
redisContext *c = redisConnect("127.0.0.1", 6379);
if (c->err) {
printf("Error: %s\n", c->errstr);
// handle error
}
### Sending commands
There are several ways to issue commands to Redis. The first that will be introduced is
`redisCommand`. This function takes a format similar to printf. In the simplest form,
it is used like this:
reply = redisCommand(context, "SET foo bar");
The specifier `%s` interpolates a string in the command, and uses `strlen` to
determine the length of the string:
reply = redisCommand(context, "SET foo %s", value);
When you need to pass binary safe strings in a command, the `%b` specifier can be
used. Together with a pointer to the string, it requires a `size_t` length argument
of the string:
reply = redisCommand(context, "SET foo %b", value, valuelen);
Internally, Hiredis splits the command in different arguments and will
convert it to the protocol used to communicate with Redis.
One or more spaces separates arguments, so you can use the specifiers
anywhere in an argument:
reply = redisCommand(context, "SET key:%s %s", myid, value);
### Using replies
The return value of `redisCommand` holds a reply when the command was
successfully executed. When an error occurs, the return value is `NULL` and
the `err` field in the context will be set (see section on **Errors**).
Once an error is returned the context cannot be reused and you should set up
a new connection.
The standard replies that `redisCommand` are of the type `redisReply`. The
`type` field in the `redisReply` should be used to test what kind of reply
was received:
* **`REDIS_REPLY_STATUS`**:
* The command replied with a status reply. The status string can be accessed using `reply->str`.
The length of this string can be accessed using `reply->len`.
* **`REDIS_REPLY_ERROR`**:
* The command replied with an error. The error string can be accessed identical to `REDIS_REPLY_STATUS`.
* **`REDIS_REPLY_INTEGER`**:
* The command replied with an integer. The integer value can be accessed using the
`reply->integer` field of type `long long`.
* **`REDIS_REPLY_NIL`**:
* The command replied with a **nil** object. There is no data to access.
* **`REDIS_REPLY_STRING`**:
* A bulk (string) reply. The value of the reply can be accessed using `reply->str`.
The length of this string can be accessed using `reply->len`.
* **`REDIS_REPLY_ARRAY`**:
* A multi bulk reply. The number of elements in the multi bulk reply is stored in
`reply->elements`. Every element in the multi bulk reply is a `redisReply` object as well
and can be accessed via `reply->element[..index..]`.
Redis may reply with nested arrays but this is fully supported.
Replies should be freed using the `freeReplyObject()` function.
Note that this function will take care of freeing sub-replies objects
contained in arrays and nested arrays, so there is no need for the user to
free the sub replies (it is actually harmful and will corrupt the memory).
**Important:** the current version of hiredis (0.10.0) free's replies when the
asynchronous API is used. This means you should not call `freeReplyObject` when
you use this API. The reply is cleaned up by hiredis _after_ the callback
returns. This behavior will probably change in future releases, so make sure to
keep an eye on the changelog when upgrading (see issue #39).
### Cleaning up
To disconnect and free the context the following function can be used:
void redisFree(redisContext *c);
This function immediately closes the socket and then free's the allocations done in
creating the context.
### Sending commands (cont'd)
Together with `redisCommand`, the function `redisCommandArgv` can be used to issue commands.
It has the following prototype:
void *redisCommandArgv(redisContext *c, int argc, const char **argv, const size_t *argvlen);
It takes the number of arguments `argc`, an array of strings `argv` and the lengths of the
arguments `argvlen`. For convenience, `argvlen` may be set to `NULL` and the function will
use `strlen(3)` on every argument to determine its length. Obviously, when any of the arguments
need to be binary safe, the entire array of lengths `argvlen` should be provided.
The return value has the same semantic as `redisCommand`.
### Pipelining
To explain how Hiredis supports pipelining in a blocking connection, there needs to be
understanding of the internal execution flow.
When any of the functions in the `redisCommand` family is called, Hiredis first formats the
command according to the Redis protocol. The formatted command is then put in the output buffer
of the context. This output buffer is dynamic, so it can hold any number of commands.
After the command is put in the output buffer, `redisGetReply` is called. This function has the
following two execution paths:
1. The input buffer is non-empty:
* Try to parse a single reply from the input buffer and return it
* If no reply could be parsed, continue at *2*
2. The input buffer is empty:
* Write the **entire** output buffer to the socket
* Read from the socket until a single reply could be parsed
The function `redisGetReply` is exported as part of the Hiredis API and can be used when a reply
is expected on the socket. To pipeline commands, the only things that needs to be done is
filling up the output buffer. For this cause, two commands can be used that are identical
to the `redisCommand` family, apart from not returning a reply:
void redisAppendCommand(redisContext *c, const char *format, ...);
void redisAppendCommandArgv(redisContext *c, int argc, const char **argv, const size_t *argvlen);
After calling either function one or more times, `redisGetReply` can be used to receive the
subsequent replies. The return value for this function is either `REDIS_OK` or `REDIS_ERR`, where
the latter means an error occurred while reading a reply.
没有合适的资源?快使用搜索试试~ 我知道了~
linux环境下redis包
5星 · 超过95%的资源 需积分: 9 115 下载量 20 浏览量
2014-06-13
17:23:10
上传
评论
收藏 976KB GZ 举报
温馨提示
共393个文件
c:136个
h:93个
tcl:45个
linux环境下redis包,操作向导:http://wenqiang06ky.iteye.com/blog/2079544
资源推荐
资源详情
资源评论
收起资源包目录
linux环境下redis包 (393个子文件)
00-RELEASENOTES 21KB
lua.1 4KB
luac.1 4KB
jemalloc.3 49KB
configure.ac 38KB
luavs.bat 1KB
BUGS 52B
sentinel.c 120KB
redis.c 106KB
t_zset.c 70KB
arena.c 69KB
ziplist.c 52KB
networking.c 49KB
redis-cli.c 49KB
ctl.c 45KB
aof.c 45KB
jemalloc.c 43KB
rdb.c 43KB
config.c 42KB
t_list.c 39KB
lua_cjson.c 37KB
hiredis.c 36KB
lparser.c 36KB
scripting.c 35KB
replication.c 31KB
debug.c 29KB
prof.c 29KB
t_set.c 27KB
redis-benchmark.c 27KB
dict.c 26KB
lstrlib.c 23KB
t_hash.c 23KB
lvm.c 23KB
test.c 23KB
lua_cmsgpack.c 22KB
lapi.c 22KB
sds.c 22KB
redis-check-dump.c 22KB
async.c 21KB
db.c 21KB
lcode.c 21KB
lgc.c 20KB
linenoise.c 20KB
sort.c 20KB
loadlib.c 19KB
object.c 18KB
lauxlib.c 17KB
sds.c 17KB
lbaselib.c 17KB
stats.c 17KB
zipmap.c 16KB
ldebug.c 16KB
ltable.c 16KB
intset.c 16KB
util.c 15KB
bitops.c 15KB
ckh.c 15KB
ldo.c 15KB
ae.c 14KB
t_string.c 14KB
util.c 13KB
liolib.c 13KB
tcache.c 13KB
anet.c 13KB
llex.c 12KB
multi.c 11KB
lua_struct.c 11KB
pubsub.c 11KB
ae_evport.c 11KB
chunk.c 10KB
crc64.c 10KB
dict.c 10KB
lua.c 10KB
ldblib.c 10KB
zmalloc.c 10KB
adlist.c 10KB
bio.c 9KB
net.c 9KB
lzf_c.c 9KB
memtest.c 9KB
migrate.c 8KB
ltablib.c 7KB
sha1.c 7KB
rio.c 7KB
zone.c 7KB
huge.c 7KB
slowlog.c 7KB
redis-check-aof.c 6KB
strbuf.c 6KB
quarantine.c 6KB
loslib.c 6KB
pqsort.c 6KB
lmathlib.c 6KB
lstate.c 6KB
syncio.c 5KB
lobject.c 5KB
print.c 5KB
chunk_mmap.c 5KB
ae_epoll.c 5KB
luac.c 5KB
共 393 条
- 1
- 2
- 3
- 4
资源评论
- 寻找-世界2017-08-16一直选择在这里下载,不会失望!晓寒Jason2017-12-15谢谢支持
- mengdejiaobuno12015-11-19好,可以使用,继续支持
- a514307362015-10-10不错,已经使用了!好!
晓寒Jason
- 粉丝: 7
- 资源: 9
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功