绿联usb转串口驱动v1.7.0官方版_东莞市铭豹USB转RJ45串口调试线驱动资源-CSDN文库

共7个文件

txt：2个

exe：2个

pdf：1个

转串口驱动

绿联usb转串口驱动下载

105 浏览量 2020-07-14 10:15:54 上传评论 1 收藏 3.94MB ZIP 举报

资源推荐

资源详情

资源评论

收起资源包目录

lvlianusbzckqd_downcc.zip （7个子文件）

PL2303 Windows Driver User Manual v1.7.0.pdf 1.6MB

PL2303_DriverInstallerv1.7.0_ReleaseNote.txt 7KB

PL2303CheckChipVersion.exe 215KB

PL2303CheckChipVersion_ReadMe.txt 2KB

好251网址导航.htm 127B

绿色资源网.url 316B

PL2303_Prolific_DriverInstaller_v1.7.0.exe 3.09MB

PL2303 Windows Driver User’s Manual

For Driver Installer v1.7.0 Release

For Microsoft Windows Operating Systems

Prolific Technology Inc. - 1 of 20 - August 1, 2012

All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding

the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial

damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be

reproduced or transmitted in any form by any means without the express written permission of the manufacturer.

PL2303 USB-to-Serial Bridge Chip Family

Windows Driver Installer User Manual

WHQL Driver Version Information

 Driver Installer & Build date: 1.7.0 (2012-8-1)

 GUID: ECC3713C-08A4-40E3-95F1-7D0704F1CE5E

 Windows 2000 / Windows XP (32 & 64-bit) WDM WHQL Driver: v2.1.35.211

 Compatible with Server 2003 (32 & 64-bit)

 Windows Vista / Windows 7 / Windows 8 (32 & 64-bit) WDF WHQL Driver: v3.4.31.231

 Compatible with Server 2008, Server 2008R2, Server 2012 (32 & 64-bit)

 Drivers are also available via Windows Update (need Internet connection)

System Requirements

 PC with USB 1.1/2.0/3.0 Host Controller (USB Port) and following Windows OS Family:

 Windows 2000 SP4

 Windows XP SP2 or SP3 (32 & 64 bit)

 Windows Server 2003 (32 & 64 bit)

 Windows Vista (32 & 64 bit)

 Windows 7 (32 & 64 bit)

 Windows Server 2008 / 2008 R2 (32 & 64 bit)

 Windows 8 (32 & 64 bit)

 Windows Server 2012 (32 & 64 bit)

 USB Device with below PL-2303 chip versions and their supported OS Family:

Chip Version

Windows 2000 / XP

(32 & 64 bit)

Vista / Windows 7

(32 & 64 bit)

Windows 8

(32 & 64 bit)

PL-2303H

Yes

Not Supported*

PL-2303HX (Rev A) or HXA

Yes

Not Supported*

PL-2303X or XA

Yes

Not Supported*

PL-2303HX (Rev D) or HXD

Yes

PL2303TA

Yes

PL2303TB

Yes

PL2303EA

Yes

PL2303RA

Yes

PL2303SA

Yes

* - PL2303H, PL-2303HX (Rev A), and PL-2303X are EOL and discontinued chips and Prolific will not

provide Windows 8 driver support. New driver versions will show yellow mark (Error Code 10) in Device

Manager for these EOL chip versions under Windows 8. Prolific recommends using PL2303HXD chip.

PL2303 Windows Driver User’s Manual

For Driver Installer v1.7.0 Release

For Microsoft Windows Operating Systems

Prolific Technology Inc. - 2 of 20 - August 1, 2012

All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding

the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial

damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be

reproduced or transmitted in any form by any means without the express written permission of the manufacturer.

Counterfeit Warning!!!

Please be warned that counterfeit/fake PL-2303HX Rev A (or PL-2303HXA) USB-to-Serial Controller

ICs using Prolific's trademark logo, brandname, and drivers, are being sold in the China market.

Counterfeit IC products show exactly the same outside chip markings but generally are of poor quality

and causes Windows driver compatibility issues (Yellow Mark Error Code 10 in Device Manager under

WinXP, Vista, and 7). This warning is issued to all customers and consumers to avoid confusion and

false purchase. Please purchase only from stores or vendors providing technical and RMA support.

Windows 7 Driver Installation

This section will guide you on how to install the PL-2303 Windows Driver. You can download the latest

Driver Installer program from Prolific Support website:

http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41

Note: Please take notice of the installation order. First, run the Driver Installer Program before

plugging in the USB to Serial adapter. If you already plug the device during the driver installation, you

need to re-plug the device for Windows to enumerate the device and load the drivers installed. If your

device is embedded to the system, you might need to restart the system (or click rescan hardware

changes in Device Manager) to reload and install the driver.

The following steps will show how to install the device under Windows 7 (64-bit) OS as this is the most

inquired driver installation support received by Prolific. The procedures are the same and straight-

forward for all other supported Windows operating system versions.

PL2303 Windows Driver User’s Manual

For Driver Installer v1.7.0 Release

For Microsoft Windows Operating Systems

Prolific Technology Inc. - 3 of 20 - August 1, 2012

All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding

the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial

damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be

reproduced or transmitted in any form by any means without the express written permission of the manufacturer.

1. Power on your computer and boot to Windows. Run or double-click the PL-2303 Windows Driver

Installer program.

2. The InstallShield Wizard will be displayed to inform you that the PL-2303 USB-to-Serial driver

will be installed on your computer. Click Next to continue.

PL2303 Windows Driver User’s Manual

For Driver Installer v1.7.0 Release

For Microsoft Windows Operating Systems

Prolific Technology Inc. - 4 of 20 - August 1, 2012

All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding

the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial

damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be

reproduced or transmitted in any form by any means without the express written permission of the manufacturer.

3. The PL-2303 Driver Installer program will then start to install the drivers needed.

4. Click the Finish button to close the InstallShield program. If you have plugged the cable into the

PC while running the setup installation, please unplug and replug the cable for the system to

detect the device.

PL2303 Windows Driver User’s Manual

For Driver Installer v1.7.0 Release

For Microsoft Windows Operating Systems

Prolific Technology Inc. - 5 of 20 - August 1, 2012

All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding

the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial

damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be

reproduced or transmitted in any form by any means without the express written permission of the manufacturer.

5. Plug in the USB to Serial adapter to the PC USB port. Windows should detect the driver as

Prolific USB-to-Serial Comm Port. Go to Device Manager and check for the “Prolific

USB-to-Serial Comm Port” device and the COM port number assigned by Windows.

6. You can also check the driver version by right-clicking on the “Prolific USB-to-Serial Comm Port”

device and select Properties and Driver tab.

评论收藏

内容反馈

weixin_38570145

粉丝: 4
资源: 924

绿联usb转串口驱动 v1.7.0 官方版

最新资源

绿联usb转串口驱动 v1.7.0 官方版

USB转串口（RS232）驱动下载

绿联USB转rs232驱动程序

绿联 USB 转 COM 驱动（配Win7可用的超级终端）

绿联网卡驱动

usb转串口驱动，win11亲测可用

绿联console线驱动.zip

绿联console线驱动（多款线驱动）

smartlink芯片驱动

PL23XX_Prolific_DriverInstaller_v206.zip

win11-PL23XX_Prolific_DriverInstaller_v206

usb转串口驱动

usb转串口 串口转usb 驱动

USB转RS232串口驱动_PL2303_v1.7.0

PL2303_Prolific_v1.7.0串口驱动.exe

USB转232串口驱动程序(usb2.0-serial) 驱动合集，支持win7

RS232串口转USB最新驱动（Win7-Win10版的32位和64位）

USB转串口驱动64位Win7可用

绿联RS232_driver.rar

嵌入式，PL2303-win11驱动程序

完整版全部驱动 Console线-USB转RJ45 FT232芯片 USB转串口驱动.rar

Console线驱动（USB转串口兼容WIN10）

console线驱动

usb-console(console口转usb驱动) v1.5 最新版

绿联USB2.0转串口DB9打印线驱动

sr9600 usb网卡驱动 官方版

枫林V800高拍仪驱动 v1.7.1 官方版

雷柏t120p无线鼠标驱动 v1.7 官方版

雷柏3900无线鼠标驱动 v1.7 官方版

USB TO RS232console线转接驱动for windows

最新资源

usb转串口串口转usb 驱动

sr9600 usb网卡驱动官方版