// TI File $Revision: /main/1 $
// Checkin $Date: August 18, 2006 13:46:06 $
//###########################################################################
//
// FILE: DSP2833x_DefaultIsr.c
//
// TITLE: DSP2833x Device Default Interrupt Service Routines.
//
// This file contains shell ISR routines for the 2833x PIE vector table.
// Typically these shell ISR routines can be used to populate the entire PIE
// vector table during device debug. In this manner if an interrupt is taken
// during firmware development, there will always be an ISR to catch it.
//
// As develpment progresses, these ISR rotuines can be eliminated and replaced
// with the user's own ISR routines for each interrupt. Since these shell ISRs
// include infinite loops they will typically not be included as-is in the final
// production firmware.
//
//###########################################################################
// $TI Release: DSP2833x Header Files V1.01 $
// $Release Date: September 26, 2007 $
//###########################################################################
#include "DSP2833x_Device.h" // DSP2833x Headerfile Include File
#include "DSP2833x_Examples.h" // DSP2833x Examples Include File
// Connected to INT13 of CPU (use MINT13 mask):
// Note CPU-Timer1 is reserved for TI use, however XINT13
// ISR can be used by the user.
interrupt void INT13_ISR(void) // INT13 or CPU-Timer1
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// Note CPU-Timer2 is reserved for TI use.
interrupt void INT14_ISR(void) // CPU-Timer2
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void DATALOG_ISR(void) // Datalogging interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void RTOSINT_ISR(void) // RTOS interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void EMUINT_ISR(void) // Emulation interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void NMI_ISR(void) // Non-maskable interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void ILLEGAL_ISR(void) // Illegal operation TRAP
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm(" ESTOP0");
for(;;);
}
interrupt void USER1_ISR(void) // User Defined trap 1
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER2_ISR(void) // User Defined trap 2
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER3_ISR(void) // User Defined trap 3
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER4_ISR(void) // User Defined trap 4
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER5_ISR(void) // User Defined trap 5
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER6_ISR(void) // User Defined trap 6
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER7_ISR(void) // User Defined trap 7
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER8_ISR(void) // User Defined trap 8
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER9_ISR(void) // User Defined trap 9
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER10_ISR(void) // User Defined trap 10
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER11_ISR(void) // User Defined trap 11
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER12_ISR(void) // User Defined trap 12
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// -----------------------------------------------------------
// PIE Group 1 - MUXed into CPU INT1
// -----------------------------------------------------------
// INT1.1
interrupt void SEQ1INT_ISR(void) //SEQ1 ADC
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.2
interrupt void SEQ2INT_ISR(void) //SEQ2 ADC
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm(" ESTOP0");
for(;;);
}
// INT1.3 - Reserved
// INT1.4
interrupt void XINT1_ISR(void)
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.5
interrupt void XINT2_ISR(void)
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.6
interrupt void ADCINT_ISR(void) // ADC
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.7
interrupt void TINT0_ISR(void) // CPU-Timer 0
{
// Insert ISR Code here
// To
没有合适的资源?快使用搜索试试~ 我知道了~
资源推荐
资源详情
资源评论
收起资源包目录
DSPtms320f28335的电能计量表实现 (162个子文件)
DSP2833x_CodeStartBranch.asm 3KB
DSP2833x_usDelay.asm 3KB
DSP2833x_CSMPasswords.asm 3KB
DSP2833x_DisInt.asm 2KB
DSP2833x_ADC_cal.asm 1KB
DSP2833x_DBGIER.asm 876B
DSP2833x_DefaultIsr.c 30KB
main.c 29KB
DSP2833x_DMA.c 21KB
DSP2833x_ECan.c 19KB
DSP2833x_SysCtrl.c 12KB
DSP2833x_EPwm.c 11KB
DSP2833x_GlobalVariableDefs.c 11KB
DSP2833x_Xintf.c 10KB
DSP2833x_ECap.c 8KB
DSP2833x_PieVect.c 7KB
DSP2833x_Sci.c 6KB
DSP2833x_EQep.c 6KB
DSP2833x_Spi.c 4KB
DSP2833x_CpuTimers.c 4KB
DSP2833x_Gpio.c 3KB
DSP2833x_I2C.c 3KB
DSP2833x_PieCtrl.c 3KB
DSP2833x_Adc.c 2KB
DSP2833x_MemCopy.c 1KB
DSP2833x_Power.c 968B
.ccsproject 464B
DSP2833x_Headers_nonBIOS.cmd 8KB
28335_RAM_lnk.cmd 4KB
.cproject 22KB
DSP2833x_SWPrioritizedIsrLevels.h 142KB
IQmathLib.h 123KB
DSP2833x_ECan.h 44KB
DSP2833x_Mcbsp.h 31KB
DSP2833x_EPwm.h 16KB
DSP2833x_Gpio.h 16KB
DSP2833x_DMA.h 13KB
DSP2833x_SysCtrl.h 13KB
DSP2833x_Adc.h 10KB
DSP2833x_EQep.h 10KB
DSP2833x_GlobalPrototypes.h 8KB
DSP2833x_Sci.h 8KB
DSP2833x_I2c.h 7KB
DSP2833x_Device.h 7KB
DSP2833x_PieVect.h 6KB
DSP2833x_DefaultIsr.h 6KB
DSP2833x_Spi.h 6KB
DSP2833x_ECap.h 6KB
DSP2833x_PieCtrl.h 6KB
DSP2833x_CpuTimers.h 6KB
DSP2833x_Examples.h 5KB
DSP2833x_I2c_defines.h 4KB
DSP2833x_EPwm_defines.h 4KB
DSP2833x_Xintf.h 4KB
SFO_V5.h 3KB
DSP2833x_DevEmu.h 3KB
DSP2833x_XIntrupt.h 2KB
SFO.h 2KB
DSP2833x_Dma_defines.h 2KB
fdacoefs.h 1KB
DSP2833x_FFT.h 1KB
DSP2833x_Power.h 847B
DSP2833x_Project.h 720B
five_level_0517.launch 4KB
makefile 6KB
makefile 6KB
five_level_0517.map 34KB
five_level_0517.map 33KB
subdir_rules.mk 16KB
subdir_rules.mk 14KB
subdir_vars.mk 5KB
subdir_vars.mk 5KB
sources.mk 2KB
sources.mk 2KB
subdir_rules.mk 1KB
subdir_rules.mk 1KB
subdir_vars.mk 608B
subdir_vars.mk 608B
subdir_vars.mk 373B
subdir_vars.mk 373B
subdir_rules.mk 289B
subdir_rules.mk 289B
objects.mk 250B
objects.mk 250B
DSP2833x_GlobalVariableDefs.obj 119KB
main.obj 58KB
epwm0822.obj 42KB
DSP2833x_ECan.obj 40KB
DSP2833x_Mcbsp.obj 37KB
DSP2833x_DMA.obj 34KB
DSP2833x_DefaultIsr.obj 29KB
DSP2833x_PieVect.obj 17KB
DSP2833x_Xintf.obj 16KB
DSP2833x_SysCtrl.obj 16KB
DSP2833x_EPwm.obj 15KB
DSP2833x_ECap.obj 14KB
DSP2833x_Sci.obj 13KB
DSP2833x_EQep.obj 13KB
DSP2833x_Spi.obj 12KB
DSP2833x_Adc.obj 12KB
共 162 条
- 1
- 2
资源评论
addup1314
- 粉丝: 4
- 资源: 4
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- 基于keras+fasterRCNN,在VOC格式的口罩数据集上训练,检测人群中有无戴口罩python源码+模型
- 基于opencv+qt5机器视觉的传统缺陷检测, 即采用标准图片和待测图片进行pixel to pixel的XOR操作源码+文档
- 管道内检测缺陷数据库管理系统源码+文档说明+sln
- 毕业设计-低功耗STM32F411开发板(原理图+PCB源文件+官方例程+驱动等)源码+文档说明+截图
- 基于yolov5-tensorRT检测+发动机缸体内壁缺陷检测系统源码+文档说明
- 基于C++实现的锂电池缺陷检测源码+文档说明
- push_version
- 软件自制图像批量压缩工具
- 经典缺陷检测算法源码整理包含PaDiM(2020ICPR)、PatchCore(2022CVPR)、SimpleNet+文档说明
- 基于深度学习的抗梯度噪声的缺陷检测器python源码+文档说明+模型的预训练
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功