RIPv2 的两种认证方式的配置
一、 RIPv2 密文认证
1. 拓扑图
2. 具体配置步骤:
1) 首先给各路由器配置 IP 信息
R1 配置
Router>en
Router#conf t
Enter conguraon commands, one per line. End with CNTL/Z.
Router(cong)#int fa0/0
Router(cong-if)#ip address 12.1.1.1 255.255.255.0
Router(cong-if)#no shutdown
Router(cong-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
Router(cong-if)#
R2 的配置
Router#conf t
Enter conguraon commands, one per line. End with CNTL/Z.
Router(cong)#int fa0/0
Router(cong-if)#ip address 12.1.1.2 255.255.255.0
Router(cong-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(cong-if)#ex