SecureCRT(R) 5.1.3 (Official) -- July 25, 2006
Copyright (C) 1995-2006 VanDyke Software, Inc.
All rights reserved.
This file contains a SecureCRT product history. It includes lists
of new features, changes, and bug fixes sorted by release. For a
product description, installation notes, registration information,
and contact information, please refer to Readme.txt (downloaded
with this installation).
Changes in SecureCRT 5.1.3 (Official) -- July 25, 2006
------------------------------------------------------
Changes:
- SSH1: Compression is now off by default.
Bug fixes:
- Reduced the time it takes for the Connect dialog to display, which
was noticeable on a network or USB drive.
- Running a script that modified the ANSI colors caused SecureCRT
to crash.
- When CTRL+TAB was used to switch between tabs, the scrollbar had
the position of the most recently active tab rather than the
previous position for that tab.
- The keymap assignments changed when there were multiple tabs
and a session in a tab other than the first tab was reset.
- It was not possible to specify a UNC path (Samba) for a log file
as it was in versions prior to 5.0.
- In SecureCRT 5.1.2, it was not possible to disable "Send initial
carriage return" in Logon Scripts as in previous versions.
- SSH1: Under certain circumstances, SSH1 port forwarding ended
abruptly.
- SSH1: When generating an RSA key for an SSH1 session, if the user
did not have write permissions for the specified save folder,
SecureCRT crashed.
- SSH1: The NO-OP anti-idle option caused random characters to be
sent to Cisco ISR routers. The "Send protocol NO-OP" session
option can now be turned off for SSH1 sessions.
- SSH1: It was not possible to specify the DES cipher from the
command line for SSH1 sessions.
- VSFTP: If the "version" command was issued when VSFTP was not
connected to a session, VSFTP crashed.
Changes in SecureCRT 5.1.2 (Official) -- May 25, 2006
-----------------------------------------------------
Bug fixes:
- Line drawing did not work correctly for SCO ANSI emulation.
- When the default session was edited and a tab other than the first
tab was active, the "Apply change to all sessions?" prompt was
displayed even if no changes were made.
- Under certain circumstances, the color change sequence for
256-color Xterm emulation was split between buffers, which caused
some colors to be displayed incorrectly.
- SSH2: SecureCRT could crash when using the TAB key to complete a
filename in an SFTP tab, especially if TAB was pressed multiple
times.
Changes in SecureCRT 5.1.1 (Official) -- April 25, 2006
-------------------------------------------------------
Changes:
- For new installations, the default local directory for SFTP tabs
is now "My Documents". The SFTP local directory can be set
through a session INI-file only option called "Sftp Tab Local
Directory".
Bug fixes:
- There were problems with line drawing characters and menu
positions when running dellmgr.
- On 64-bit systems, pressing "8" brought SecureCRT to the
foreground.
- In some cases, when the SecureCRT window was maximized, the
arrow control was placed in the tab bar even though it was
not necessary.
- SSH2: Under certain circumstances, SecureCRT crashed when
attempting to start an X client using SSH2 X11 forwarding.
- SSH2: The trailing slash was no longer being appended during
local file completion. This was a change in behavior from 5.0.
- SSH2: It was not possible to change the passphrase of a public
key through the Public Key Properties dialog.
- SSH2: When initiating an SSH2 password change from the Password
Properties dialog and multiple authentications were selected,
misleading errors were displayed.
Changes in SecureCRT 5.1 (Official) -- March 28, 2006
-----------------------------------------------------
Bug fixes:
- In some cases, escape sequences beginning with "ESC ]" were
incorrectly interpreted.
Changes in SecureCRT 5.1 (Beta 4) -- March 14, 2006
---------------------------------------------------
Changes:
- Added Global.ini option "Serialize Connections". If this
option is set, when multiple sessions are connected at the
same time, they are connected serially instead of in parallel.
- VCP/VSH: The command-line clients now display unsupported
host-key algorithms as they are received from the server.
Previously unsupported algorithms were displayed as blank
strings.
- VCP/VSH: Entering the wrong passphrase for an SSH1 RSA public
key no longer displays an "invalid structure" error. Users are
now prompted to enter a passphrase until they use the correct
one or cancel.
Bug fixes:
- If a generic proxy was misconfigured, it caused SecureCRT to
hang, and disconnecting the session caused SecureCRT to crash.
- SecureCRT crashed when unsaving a password for a session and
password that had been specified on the command line.
- The tab status indicator changed to "connected" when connecting
to a host that did not exist if another tab that was connected
was selected before the connection attempt timed out.
- SSH2: When editing the default session, it was possible do a
password change.
- SSH2: Under certain circumstances, even though an X.509 host key
had been accepted and saved, SecureCRT asked about accepting it
during key re-exchange or when reconnecting.
Changes in SecureCRT 5.1 (Beta 3) -- March 2, 2006
--------------------------------------------------
Changes:
- The installation program no longer removes old versions of
SecureCRT from Windows Add/Remove Programs.
- For DNS addresses, SecureCRT uses the return list as is,
rather than preferring IPv4 addresses.
Bug fixes:
- If SecureCRT and SecureFX were integrated, but were out of
sync, it was possible for the authentication method and key
exchange lists to be empty on the SSH2 page in the Session
Options dialog.
- After installing SecureCRT for the first time, upon starting,
the user was prompted to configure TAPI information and
SecureCRT crashed if the dialog was cancelled.
- Under certain circumstances, printing did not work after
upgrading from a version of SecureCRT prior to 5.0.
- If a log file name with parameter substitutions was specified
and "Prompt for filename" was set, the log file name was not
honored.
- In the Quick Connect dialog, changes made to the default
session were only reflected for the default protocol.
- The transfer protocol name was modified in the session .ini
file every time a connection attempt to that session was made.
- SSH1: Under certain circumstances, authentication failed when
connecting to an SSH1 server using Quick Connect.
- SSH1: Entering the wrong passphrase for an SSH1 RSA public key
resulted in an "invalid structure" error.
- SSH2: In the Local Port Forwarding Properties dialog, it was
not possible to use the same local port as another port forward
when the local IP address was different.
Changes in SecureCRT 5.1 (Beta 2) -- February 21, 2006
------------------------------------------------------
New features:
- Added history support to the chat window, allowing previous
commands to be viewed, edited, and sent.
- SSH2: Passwords for SSH2 sessions can be changed from the
Session Options dialog using the SSH2 protocol when it is
supported by the remote machine.
Changes:
- Added a global-file-only option "Clipboard Data Format",
which allows the clipboard data format to be set to CF_TEXT,
CF_OEMTEXT, o
没有合适的资源?快使用搜索试试~ 我知道了~
SecureCRT v6.5.8.380 汉化版
共50个文件
dll:13个
exe:7个
key:7个
4星 · 超过85%的资源 需积分: 10 11 下载量 129 浏览量
2010-03-09
22:53:45
上传
评论
收藏 6.63MB RAR 举报
温馨提示
SecureCRT是一款支持SSH(SSH1和SSH2)的终端仿真程序,同时支持Telnet和rlogin协议。SecureCRT是一款用于连接运行包括Windows、UNIX和VMS的远程系统的理想工具。通过使用内含的VCP命令行程序可以进行加密文件的传输。有流行CRTTelnet客户机的所有特点,包括:自动注册、对不同主机保持不同的特性、打印功能、颜色设置、可变屏幕尺寸、用户定义的键位图和优良的VT100,VT102,VT220和ANSI竞争.能从命令行中运行或从浏览器中运行.其它特点包括文本手稿、易于使用的工具条、用户的键位图编辑器、可定制的ANSI颜色等.SecureCRT的SSH协议支持DES,3DES和RC4密码和密码与RSA鉴别.
资源推荐
资源详情
资源评论
收起资源包目录
SecureCRT.rar (50个子文件)
SecureCRT
Msvcrt.dll 272KB
msvcp60.dll 392KB
vkeygen.exe 556KB
SSH2Core41.dll 964KB
vsh.exe 1.15MB
SecureCRT.EXE 1.78MB
SN.txt 269B
id_dsa_1024 1KB
ORDER.TXT 5KB
vsftp.exe 1.29MB
VT100DB.FON 62KB
HISTORY.TXT 17KB
keymaps
vt220.key 2KB
doorway.key 2KB
vt400.key 4KB
CRiSP.key 5KB
vt100.key 2KB
VShell.key 10KB
vt220-linux.key 2KB
upload
VT100DT.FON 62KB
Connection Protocols
Rlogin.dll 84KB
SSH2.dll 364KB
Tapi.dll 136KB
SSH1.enable 14B
Telnet.dll 96KB
Serial.dll 100KB
vcp.exe 1.18MB
License42.dll 608KB
VT100.FON 44KB
cryptocme2.sig 605B
scripts
example2.vbs 787B
example1.vbs 653B
example3.vbs 820B
ConnectDialog13.dll 796KB
download
VT100W.FON 62KB
vpka.exe 1.15MB
Menus
session1.bmp 1KB
example.mnu 4KB
allsystem.mnu 7KB
session2.bmp 1KB
session3.bmp 1KB
kiosk.mnu 4KB
default.mnu 7KB
send.bmp 310B
cryptocme2.dll 3.11MB
Mfc42.dll 980KB
id_dsa_1024.pub 662B
SSH2Client41.dll 416KB
ACTIVATOR.EXE 148KB
SecureCRT.CHM 945KB
共 50 条
- 1
资源评论
- xufan92018-06-14打不开怎么办
- genius_0202015-12-22不错的串口助手,很实用。
shun232323
- 粉丝: 0
- 资源: 3
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功