/**
******************************************************************************
* @file stm32f10x_tim.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the TIM firmware functions.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_tim.h"
#include "stm32f10x_rcc.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup TIM
* @brief TIM driver modules
* @{
*/
/** @defgroup TIM_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Defines
* @{
*/
/* ---------------------- TIM registers bit mask ------------------------ */
#define SMCR_ETR_Mask ((uint16_t)0x00FF)
#define CCMR_Offset ((uint16_t)0x0018)
#define CCER_CCE_Set ((uint16_t)0x0001)
#define CCER_CCNE_Set ((uint16_t)0x0004)
/**
* @}
*/
/** @defgroup TIM_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_FunctionPrototypes
* @{
*/
static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
uint16_t TIM_ICFilter);
/**
* @}
*/
/** @defgroup TIM_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup TIM_Private_Functions
* @{
*/
/**
* @brief Deinitializes the TIMx peripheral registers to their default reset values.
* @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
* @retval None
*/
void TIM_DeInit(TIM_TypeDef* TIMx)
{
/* Check the parameters */
assert_param(IS_TIM_ALL_PERIPH(TIMx));
if (TIMx == TIM1)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE);
}
else if (TIMx == TIM2)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE);
}
else if (TIMx == TIM3)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE);
}
else if (TIMx == TIM4)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE);
}
else if (TIMx == TIM5)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE);
}
else if (TIMx == TIM6)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE);
}
else if (TIMx == TIM7)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE);
}
else if (TIMx == TIM8)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE);
}
else if (TIMx == TIM9)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, DISABLE);
}
else if (TIMx == TIM10)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, DISABLE);
}
else if (TIMx == TIM11)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, DISABLE);
}
else if (TIMx == TIM12)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, DISABLE);
}
else if (TIMx == TIM13)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, DISABLE);
}
else if (TIMx == TIM14)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, DISABLE);
}
else if (TIMx == TIM15)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, DISABLE);
}
else if (TIMx == TIM16)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, DISABLE);
}
else
{
if (TIMx == TIM17)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, DISABLE);
}
}
}
/**
* @brief Initializes the TIMx Time Base Unit peripheral according to
* the specified parameters in the TIM_TimeBaseInitStruct.
* @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
* @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef
* structure that contains the configuration information for the
* specified TIM peripheral.
* @retval None
*/
void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct)
{
uint16_t tmpcr1 = 0;
/* Check the parameters */
assert_param(IS_TIM_ALL_PERIPH(TIMx));
assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode));
assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision));
tmpcr1 = TIMx->CR1;
if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM2) || (TIMx == TIM3)||
(TIMx == TIM4) || (TIMx == TIM5))
{
/* Select the Counter Mode */
tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS)));
tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode;
}
if((TIMx != TIM6) && (TIMx != TIM7))
{
/* Set the clock division */
tmpcr1 &= (uint16_t)(~((uint16_t)TIM_CR1_CKD));
tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision;
}
TIMx->CR1 = tmpcr1;
/* Set the Autoreload value */
TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ;
/* Set the Prescaler value */
TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler;
if ((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)|| (TIMx == TIM16) || (TIMx == TIM17))
{
/* Set the Repetition Counter value */
TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter;
}
/* Generate an update event to reload the Prescaler and the Repetition counter
values immediately */
TIMx->EGR = TIM_PSCReloadMode_Immediate;
}
/**
* @brief Initializes the TIMx Channel1 according to the specified
* parameters in the TIM_OCInitStruct.
* @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
* @param TIM_OCInitStru
没有合适的资源?快使用搜索试试~ 我知道了~
资源推荐
资源详情
资源评论
收起资源包目录
test_led.zip (81个子文件)
test_led
OBJ
LED.hex 13KB
LED.plg 173B
makefile 2KB
stm32f103VET6.ld 7KB
Output
A303_GJXF.bin 40KB
A303_GJXF.elf 266KB
A303_GJXF.hex 114KB
A303_GJXF.asm 2.68MB
HARDWARE
LED
led.h 642B
led.c 1KB
Lib
libc.a 904KB
libgcc.a 1.54MB
libm.a 450KB
keilkilll.bat 399B
SYSTEM
delay
delay.h 1KB
delay.c 5KB
sys
sys.h 3KB
sys.c 616B
usart
usart.h 1KB
usart.c 5KB
STM32F10x_FWLib
inc
stm32f10x_adc.h 21KB
stm32f10x_tim.h 51KB
stm32f10x_usart.h 16KB
stm32f10x_dac.h 15KB
stm32f10x_bkp.h 7KB
stm32f10x_dbgmcu.h 4KB
stm32f10x_pwr.h 4KB
stm32f10x_sdio.h 21KB
stm32f10x_wwdg.h 3KB
stm32f10x_rtc.h 4KB
stm32f10x_gpio.h 20KB
stm32f10x_flash.h 25KB
stm32f10x_dma.h 20KB
stm32f10x_rcc.h 30KB
stm32f10x_iwdg.h 4KB
stm32f10x_fsmc.h 26KB
stm32f10x_exti.h 7KB
misc.h 9KB
stm32f10x_spi.h 17KB
stm32f10x_crc.h 2KB
stm32f10x_i2c.h 29KB
stm32f10x_can.h 27KB
stm32f10x_cec.h 6KB
src
stm32f10x_sdio.c 28KB
stm32f10x_adc.c 46KB
stm32f10x_bkp.c 8KB
stm32f10x_cec.c 11KB
stm32f10x_usart.c 37KB
stm32f10x_pwr.c 9KB
stm32f10x_flash.c 61KB
stm32f10x_dbgmcu.c 5KB
stm32f10x_wwdg.c 6KB
stm32f10x_gpio.c 23KB
stm32f10x_crc.c 3KB
stm32f10x_rtc.c 8KB
stm32f10x_dac.c 19KB
stm32f10x_spi.c 30KB
stm32f10x_can.c 44KB
stm32f10x_iwdg.c 5KB
stm32f10x_dma.c 29KB
stm32f10x_tim.c 107KB
stm32f10x_i2c.c 45KB
stm32f10x_rcc.c 50KB
misc.c 7KB
stm32f10x_exti.c 7KB
stm32f10x_fsmc.c 35KB
CORE
core_cm3.c 17KB
core_cm3.h 84KB
startup_stm32f10x_hd.s 13KB
USER
stm32f10x_it.c 2KB
main.c 478B
LED.uvgui.yang 74KB
JLinkSettings.ini 285B
LED.uvproj 17KB
LED.uvgui_yang.bak 74KB
system_stm32f10x.h 2KB
LED.uvopt 15KB
stm32f10x_conf.h 3KB
system_stm32f10x.c 36KB
stm32f10x_it.h 2KB
stm32f10x.h 619KB
共 81 条
- 1
资源评论
- lewuyouc2017-05-26虽然没用上,但是免费呀,支持作者
特立独行的猫a
- 粉丝: 7w+
- 资源: 37
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- torch-1.8.1+cu111-cp38-cp38-linux-x86-64.whl +torchvision
- 计算机设计 - VB+ACCESS网络计时管理系统设计(源代码+系统),保证可靠运行,毕业生可参考,免费资源下载
- 计算机设计 - vb+ACCESS身份证管理系统设计(LW+源代码),保证可靠运行,毕业生可参考,免费资源下载
- ARCMAP自动编号工具
- W801学习笔记十三:掌机系统-系统基础组件-PNG-loader
- studydatastruct3
- XHS链接提取/作品采集工具
- general-exporter windows
- kotlin语法快速入门文档
- general-exporter linux
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功