DYNAMIC SIMULATION OF ELECTRIC MACHINERY
Chee-Mun Ong, published by Prentice-Hall, � 1997 Chee-Mun Ong
The CD-ROM accompanying the book contains project files for the
Macintosh, Unix, and Window operating systems.
Files given here are for the Window operating systems.
The folders are labelled in accordance with the chapter number of the text.
For example, C2 refers to project files for Chapter 2.
In general, filenames beginning with the letter M are MATLAB M-files
and those beginning with the letter S are SIMULINK files.
The MATLAB files will run on MATLAB 4.2 and the new MATLAB 5.
SIMULINK files for version 1 and 2 are, however, slightly different.
For convenience I have included the files for both SIMULINK 1 and 2.
Those for SIMULINK 1 have a .m filename extension and those for
SIMULINK 2 have a .mdl filename extension. For example, the MATLAB
M-file for project No. 3, m3.m say, will typically be associated
with s3.m for SIMULINK 1 and with s3.mdl for SIMULINK 2.
To view or run a SIMULINK file, first move to the directory
containing the SIMULINK file, then use the open file command
under the SIMULINK menu to select and open the SIMULINK file.
If there are parameters in a lookup table or a repeating-sequence
block that are not initialized, there will be error/warning messages
saying so at the time when the file is first open. Within most of the
SIMULINK files, I have placed a masked block of the M file that you can
use to initialize the simulation. Double-click on the masked M FILE block
and respond to the prompts in the MATLAB command window to properly
initialize the simulation with parameters and operating condition,
and to run the simulation.
The given files have been tested on MATLAB Version 4.2c and SIMULINK Version
1.0a and on the pre-release MATLAB Version 5 and SIMULINK Version 2.
Also included in the CD-ROM are the following utility files:
fftplot.m - for computing and plotting the fft of a variable.
The variable value and time are stored in row arrays.
sizeplot.m - for resizing the figure window
These utility files should be placed in a directory that is on the
MATLAB's search path, for example, in the MATLAB/bin directory.
Depending on the display resolution used, the SIMULINK screen window on your
computer monitor may or may not display the given SIMULINK simulations in full.
The screen's view can be increased by setting the display resolution higher,
at the expense of smaller lettering. The simulation diagrams given should fit
within an open screen when using a display resolution of 800X600 pixels or higher.
******************************************************************************
CONTENTS
CHAPTER 2 (C2 Folder) INTRODUCTION TO MATLAB/SIMULINK
Exercise 1: Variable Frequency Oscillator
SIMULINK file s1.mdl
MATLAB m-file m1.m
Exercise 2: Parallel RLC Circuit
SIMULINK file s2.mdl
MATLAB m-file m2.m
MATLAB m-file m2init.m(1st half of m2.m)
MATLAB m-file m2plot.m(2nd half of m2.m)
Exercise 3: AC Energization of a RL Circuit
SIMULINK file s3.mdl
MATLAB m-file m3.m
Exercise 4: Series RLC Resonant Circuit
SIMULINK file s4.mdl
MATLAB m-file m4.m
**************
CHAPTER 3 (C3 Folder) BASICS ON MAGNETICS AND LINE MODELING
Project 1: Line Parameters and Circuit Models:
(a) Relative Accuracy of Circuit Models for
Different Line Lengths
(b) Real and Reactive Power Transfer
SIMULINK file none
MATLAB M-file m1.m
Project 2: Switching Transients in Single-Phase Line
SIMULINK file s2.mdl
MATLAB M-file m2.m
**************
CHAPTER 4 (C4 Folder) TRANSFORMERS
Project 1: Short-circuit and RL Load Terminations
SIMULINK file s1a.mdl (linear transformer)
SIMULINK file s1b.mdl (piece-wise linear saturation)
SIMULINK file s1c.mdl (lookup table saturation)
MATLAB M-file m1.m
MATLAB M-file fftplot.m (fftplot.m should be
placed in a directory on MATLAB's search path)
Project 2: Open-Circuit Termination, In-rush Current,
and DC Bias Core Saturation
SIMULINK file s1c.mdl (lookup table saturation)
MATLAB M-file m1.m
Use the given FFTPLOT.m to obtain the discrete Fourier transform.
Project 3: Autotransformer Connection
SIMULINK file none
MATLAB M-file none
Project 4: Delta-Wye Transformer:Voltage and Current Ratios
Zero-Sequence Current
SIMULINK file s4.mdl
MATLAB M-file m4.m
It also contain the following M-files for translating an
open-circuit curve to an instantaneous magnetization
curve and comparison study.
SIMULINK file smag.mdl
maginit.m (translates open-circuit curve and
sets up SIMULINK smag.m)
magplt.m (plot results from smag.m)
**************
CHAPTER 5 (C5 Folder) BASICS OF ELECTRIC MACHINES AND
TRANSFORMATION
Project 1: QD0 Transformation of Network Components
SIMULINK file none
MATLAB M-file none
Project 2: Space Vectors
SIMULINK file s2.mdl
MATLAB M-file m2.m (also used by masked block)
Project 3: Sinusoidal and Complex Quantities in QD0
SIMULINK file s3.mdl
MATLAB M-file m3.m (also used by masked block)
**************
CHAPTER 6 (C6 Folder) THREE-PHASE INDUCTION MACHINES
Project 1: Operating Characteristics
SIMULINK file s1.mdl
MATLAB M-file m1.m to initialize simulation and plot results
MATLAB M-file p1hp.m (1 hp induction motor)
Project 2: Starting Methods
SIMULINK file (modify a copy s1.mdl)
MATLAB M-file (modify a copy of m1.m)
MATLAB M-file p1hp.m (1 hp three-phase induction motor)
Project 3: Open-circuit Conditions
SIMULINK file (modify a copy of s1.mdl)e
MATLAB M-file (modify a copy of m1.m)
MATLAB M-file p1hp.m (1 hp three-phase induction motor)
Project 4: Linearized Analysis
SIMULINK file s4.mdl
MATLAB M-file m4.m to initialize, determine linear
model, transfer function, and plot root-locus
MATLAB M-file p20hp.m (20 hp induction motor)
MATLAB M-file m4ustp.m calculates the unit step
response of the transfer function set up in the
MATLAB workspace by running m4.m, using the
Control System Toolbox function step.
SIMULINK file s4stp.m for step response
MATLAB M-file m4stp.m to initialize s4STEP.m
Project 5: Some Non-zero v.{sg} Conditions
SIMULINK M-files s5a.mdl and s5b.mdl
MATLAB M-file m5.m to initialize simulation and plot results
MATLAB M-file p1hp.m (1 hp three-phase induction motor)
Project 6: Single-phase Induction Motor
SIMULINK file s6.mdl
MATLAB M-file m6.m to initialize simulation and plot results
MATLAB M-file psph.m (1/4 hp single-phase induction motor)
**************
CHAPTER 7 (C7 Folder) SYNCHRONOUS MACHINES
Project 1: Operating Characteristics and Parameter Variations
SIMULINK file s1.mdl
MATLAB M-file m1.m to initialize simulation and plot results
MATLAB M-file set1.m (Set 1 synchronous generator parameters)
Project 2: Terminal Faults on a Synchronous Generator
SIMULINK file (modify a copy s1.mdl)
MATLAB M-file m1.m
MATLAB M-file set1.m (Set 1 synchronous generator parameters)
Project 3: Linearized Analysis of a Synchronous Generator
SIMULINK files s3.mdl and s3eig.mdl
MATLAB M-file m3.m to initialize simulation,
determine linear model, transfer functions, root-locus and plot results.
MATLAB M-file set1.m (Set 1 synchronous generator parameters)
Project 4: Permanent Magnet Synchronous Motor
SIMULINK file s4.mdl
MATLAB M-file m4.m to initialize, calculate operating
values, and plot results.
Project 5: Simulation of Synchronous Machine Model with Unequal
Stator and Rotor Mutual and Coupling of Rotor Circuits
SIMULINK files s5.mdl and s1.mdl
MATLAB M-files m5.m and m1.m to initialize, calculate operating
没有合适的资源?快使用搜索试试~ 我知道了~
电机使用MATLAB仿真软件的动态模拟.Chee.Mun.Ong.文字版.zip
共163个文件
m:102个
mdl:45个
log:9个
需积分: 17 11 下载量 97 浏览量
2015-03-31
13:04:16
上传
评论
收藏 1.44MB ZIP 举报
温馨提示
电机使用MATLAB仿真软件的动态模拟.Chee.Mun.Ong.文字版.zip
资源推荐
资源详情
资源评论
收起资源包目录
电机使用MATLAB仿真软件的动态模拟.Chee.Mun.Ong.文字版.zip (163个子文件)
f7_30new.eps 111KB
f7_30.eps 111KB
ws_ftp.log 6KB
ws_ftp.log 4KB
ws_ftp.log 3KB
ws_ftp.log 3KB
ws_ftp.log 3KB
ws_ftp.log 2KB
ws_ftp.log 2KB
ws_ftp.log 1KB
ws_ftp.log 712B
s2.m 71KB
s2eig.m 65KB
s2c.m 63KB
s3.m 58KB
s1c.m 56KB
s5b.m 54KB
s3.m 51KB
s2o.m 49KB
s5.m 48KB
s3eig.m 45KB
s5.m 45KB
s1.m 42KB
s3g.m 41KB
s4.m 39KB
s3geig.m 38KB
s1o.m 37KB
s6.m 35KB
s2.m 34KB
s4.m 34KB
s4.m 30KB
s1.m 29KB
s5a.m 28KB
s1.m 26KB
s3.m 26KB
s4stp.m 24KB
s1eig.m 24KB
s3eig.m 22KB
s2.m 20KB
s4eig.m 18KB
smg.m 13KB
m2.m 13KB
s4.m 13KB
s3b.m 12KB
s2.m 12KB
s1c.m 11KB
m3g.m 11KB
m3.m 11KB
s1.m 11KB
m4.m 11KB
s3.m 11KB
s5.m 10KB
s4.m 10KB
s3a.m 10KB
m1.m 10KB
m5.m 9KB
m3.m 9KB
s1.m 9KB
s1b.m 8KB
m4.m 8KB
s2.m 7KB
m1.m 7KB
m5.m 7KB
m4.m 6KB
s1a.m 6KB
m6.m 6KB
m1c.m 6KB
m3.m 5KB
s3.m 5KB
m1o.m 5KB
m1.m 4KB
m4.m 4KB
m5.m 4KB
m1.m 4KB
fftplot.m 4KB
fftplot.m 4KB
m4.m 3KB
mginit.m 2KB
m2.m 2KB
m4comp.m 2KB
m2.m 2KB
m3.m 2KB
m1.m 2KB
psph.m 2KB
m2fig.m 2KB
m3a.m 2KB
m4.m 2KB
m1.m 1KB
m5.m 1KB
set3b.m 1KB
p20hp.m 1KB
p20hp.m 1KB
m3b.m 1KB
set3a.m 1KB
p1hp.m 1KB
plot5c.m 997B
sizeplot.m 961B
mgplt.m 894B
i3essr.m 812B
m2.m 794B
共 163 条
- 1
- 2
资源评论
lijiediao
- 粉丝: 2
- 资源: 4
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功