USB2.0网卡驱动(windows mac linux)AX88772

//============================================================================== // ASIX AX88772B Windows 7 driver // // This document describes the driver's configurable parameters. //============================================================================== 1. Speed & Duplex: Set the Ethernet link speed. -Auto Negotiation: Auto detect the Ethernet link speed -10 Mbps Half Duplex: Set the Ethernet works on 10HD -10 Mbps Full Duplex: Set the Ethernet works on 10FD -100 Mbps Half Duplex: Set the Ethernet works on 100HD -100 Mbps Full Duplex: Set the Ethernet works on 100FD 2. Network Address : Allows user to set a MAC address of the device or use the device default address. 3. Flow Control: Configure flow control advertised capabilities -Disabled Disable flow control -Tx Enabled Enable transmit flow control -Rx Enabled Enable receive flow control -Rx & Tx Enabled Enable transmit and receive flow control 4. Packet Priority & VLAN: Enable or disable the ability to insert the 802.1Q priority and VLAN tags into the transmit packets. -Packet Priority & VLAN Disable Disable to insert the 802.1Q priority and VLAN tag -Packet Priority Enable Only enable to insert the 802.1Q priority tag -VLAN Enable Only enable to insert the 802.1Q VLAN tag -Packet Priority & VLAN Enable Enable to insert the 802.1Q priority and VLAN tag 5. VLAN ID: If user set a valid VLAN ID, the driver inserts the VLAN tag with this VLAN ID into the transmit packets and device will filter the received packets. 6. Wake on link change: Enable or disable the device to wake up the computer when detects the Ethernet link Change -Disabled Disable the Wake on link change -Enabled Enable the Wake on link change 7. Wake on Magic Packet: Enable or disable the device to wake up the computer when receives a magic packet -Disabled Disable the Wake on Magic Packet -Enabled Enable the Wake on Magic Packet 8. Wake on pattern match: Enable or disable the device to wake up the computer when receives a matched wakeup pattern -Disabled Disable the Wake on pattern match -Enabled Enable the Wake on pattern match 9. TCP Checksum Offload (IPv4): Enable or disable the device to calculate the TCP checksum of the transmit IPv4 packets and check the TCP checksum of the received IPv4 packets. -Disabled Disable the TCP Checksum Offload -Tx Enabled Enable the TCP Checksum Offload for transmit packets -Rx Enabled Enable the TCP Checksum Offload for received packets -Rx & Tx Enabled Enable the TCP Checksum Offload for transmit and received packets 10. UDP Checksum Offload (IPv4): Enable or disable the device to calculate the UDP checksum of the transmit IPv4 packets and check the UDP checksum of the received IPv4 packets. -Disabled Disable the UDP Checksum Offload -Tx Enabled Enable the UDP Checksum Offload for transmit packets -Rx Enabled Enable the UDP Checksum Offload for received packets -Rx & Tx Enabled Enable the UDP Checksum Offload for transmit and received packets 11. TCP Checksum Offload (IPv6): Enable or disable the device to calculate the TCP checksum of the transmit IPv6 packets and check the TCP checksum of the received IPv6 packets. -Disabled Disable the TCP Checksum Offload -Tx Enabled Enable the TCP Checksum Offload for transmit packets -Rx Enabled Enable the TCP Checksum Offload for received packets -Rx & Tx Enabled Enable the TCP Checksum Offload for transmit and received packets 12. UDP Checksum Offload (IPv6): Enable or disable the device to calculate the UDP checksum of the transmit IPv6 packets and check the UDP checksum of the received IPv6 packets. -Disabled Disable the UDP Checksum Offload -Tx Enabled Enable the UDP Checksum Offload for transmit packets -Rx Enabled Enable the UDP Checksum Offload for received packets -Rx & Tx Enabled Enable the UDP Checksum Offload for transmit and received packets 13. IPv4 Checksum Offload: Enable or disable the device to calculate the IP checksum of the transmit IPv4 packets and check the IP checksum of the received IPv4 packets. -Disabled Disable the IP Checksum Offload -Tx Enabled Enable the IP Checksum Offload for transmit packets -Rx Enabled Enable the IP Checksum Offload for received packets -Rx & Tx Enabled Enable the IP Checksum Offload for transmit and received packets 14. ARP Offload: When enable this ability, the device will reply the ARP request packet when computer is suspending. This ability is activated only if WOL is enabled. -Disabled Disable ARP Offload -Enabled Enable ARP Offload 15. NS Offload: When enable this ability, the device will reply the neighbor solicitation packet when computer is suspending. This ability is activated only if WOL is enabled. -Disabled Disable NS Offload -Enabled Enable NS Offload 16. AutoDetach: Enable or disable AutoDetach ability. if AutoDetach is enabled, 3 seconds later after Ethernet cable was unpluged, the device will be detached from USB. -Disabled Disable AutoDetach -Enabled Enable AutoDetach -Use EEPROM Setting Disable or enable AutoDetach accoring to the EEPROM setting 17. Mask WakeUp Event Timer: If wake up ability is enabled, the wake up function will delay this time to active. -0,4,8,12,16,20,24,28 seconds 18. WOL Link Speed: Set the Ethernet link speed when device sleeps if wake up ability is enabled. -10 Mbps First The Ethernet link speed works on 10 Mbps first if available -Use EEPROM Setting Use EEPROM setting to set Ethernet link speed