/* deflate.c -- compress data using the deflation algorithm
* Copyright (C) 1995-2005 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/*
* ALGORITHM
*
* The "deflation" process depends on being able to identify portions
* of the input text which are identical to earlier input (within a
* sliding window trailing behind the input currently being processed).
*
* The most straightforward technique turns out to be the fastest for
* most input files: try all possible matches and select the longest.
* The key feature of this algorithm is that insertions into the string
* dictionary are very simple and thus fast, and deletions are avoided
* completely. Insertions are performed at each input character, whereas
* string matches are performed only when the previous match ends. So it
* is preferable to spend more time in matches to allow very fast string
* insertions and avoid deletions. The matching algorithm for small
* strings is inspired from that of Rabin & Karp. A brute force approach
* is used to find longer strings when a small match has been found.
* A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
* (by Leonid Broukhis).
* A previous version of this file used a more sophisticated algorithm
* (by Fiala and Greene) which is guaranteed to run in linear amortized
* time, but has a larger average cost, uses more memory and is patented.
* However the F&G algorithm may be faster for some highly redundant
* files if the parameter max_chain_length (described below) is too large.
*
* ACKNOWLEDGEMENTS
*
* The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
* I found it in 'freeze' written by Leonid Broukhis.
* Thanks to many people for bug reports and testing.
*
* REFERENCES
*
* Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
* Available in http://www.ietf.org/rfc/rfc1951.txt
*
* A description of the Rabin and Karp algorithm is given in the book
* "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
*
* Fiala,E.R., and Greene,D.H.
* Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
*
*/
/* @(#) $Id$ */
#include "deflate.h"
const char deflate_copyright[] =
" deflate 1.2.3 Copyright 1995-2005 Jean-loup Gailly ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
include such an acknowledgment, I would appreciate that you keep this
copyright string in the executable of your product.
*/
/* ===========================================================================
* Function prototypes.
*/
typedef enum {
need_more, /* block not completed, need more input or more output */
block_done, /* block flush performed */
finish_started, /* finish started, need only more output at next deflate */
finish_done /* finish done, accept no more input or output */
} block_state;
typedef block_state (*compress_func) OF((deflate_state *s, int flush));
/* Compression function. Returns the block state after the call. */
local void fill_window OF((deflate_state *s));
local block_state deflate_stored OF((deflate_state *s, int flush));
local block_state deflate_fast OF((deflate_state *s, int flush));
#ifndef FASTEST
local block_state deflate_slow OF((deflate_state *s, int flush));
#endif
local void lm_init OF((deflate_state *s));
local void putShortMSB OF((deflate_state *s, uInt b));
local void flush_pending OF((z_streamp strm));
local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size));
#ifndef FASTEST
#ifdef ASMV
void match_init OF((void)); /* asm code initialization */
uInt longest_match OF((deflate_state *s, IPos cur_match));
#else
local uInt longest_match OF((deflate_state *s, IPos cur_match));
#endif
#endif
local uInt longest_match_fast OF((deflate_state *s, IPos cur_match));
#ifdef DEBUG
local void check_match OF((deflate_state *s, IPos start, IPos match,
int length));
#endif
/* ===========================================================================
* Local data
*/
#define NIL 0
/* Tail of hash chains */
#ifndef TOO_FAR
# define TOO_FAR 4096
#endif
/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
/* Minimum amount of lookahead, except at the end of the input file.
* See deflate.c for comments about the MIN_MATCH+1.
*/
/* Values for max_lazy_match, good_match and max_chain_length, depending on
* the desired pack level (0..9). The values given below have been tuned to
* exclude worst case performance for pathological files. Better values may be
* found for specific files.
*/
typedef struct config_s {
ush good_length; /* reduce lazy search above this match length */
ush max_lazy; /* do not perform lazy search above this match length */
ush nice_length; /* quit search above this match length */
ush max_chain;
compress_func func;
} config;
#ifdef FASTEST
local const config configuration_table[2] = {
/* good lazy nice chain */
/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */
/* 1 */ {4, 4, 8, 4, deflate_fast}}; /* max speed, no lazy matches */
#else
local const config configuration_table[10] = {
/* good lazy nice chain */
/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */
/* 1 */ {4, 4, 8, 4, deflate_fast}, /* max speed, no lazy matches */
/* 2 */ {4, 5, 16, 8, deflate_fast},
/* 3 */ {4, 6, 32, 32, deflate_fast},
/* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */
/* 5 */ {8, 16, 32, 32, deflate_slow},
/* 6 */ {8, 16, 128, 128, deflate_slow},
/* 7 */ {8, 32, 128, 256, deflate_slow},
/* 8 */ {32, 128, 258, 1024, deflate_slow},
/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */
#endif
/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
* For deflate_fast() (levels <= 3) good is ignored and lazy has a different
* meaning.
*/
#define EQUAL 0
/* result of memcmp for equal strings */
#ifndef NO_DUMMY_DECL
struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
#endif
/* ===========================================================================
* Update a hash value with the given input byte
* IN assertion: all calls to to UPDATE_HASH are made with consecutive
* input characters, so that a running hash key can be computed from the
* previous key instead of complete recalculation each time.
*/
#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
/* ===========================================================================
* Insert string str in the dictionary and set match_head to the previous head
* of the hash chain (the most recent string with same hash key). Return
* the previous length of the hash chain.
* If this file is compiled with -DFASTEST, the compression level is forced
* to 1, and no hash chains are maintained.
* IN assertion: all calls to to INSERT_STRING are made with consecutive
* input characters and the first MIN_MATCH bytes of str are valid
* (except for the last MIN_MATCH-1 bytes of the input file).
*/
#ifdef FASTEST
#define INSERT_STRING(s, str, match_head) \
(UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
match_head = s->head[s->ins_h], \
s->head[s->ins_h] = (Pos)(str))
#else
#define INSERT_STRING(s, str, match_head) \
(UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
match_head = s->prev[(str) & s->w_mask] = s->head[s->in
没有合适的资源?快使用搜索试试~ 我知道了~
资源推荐
资源详情
资源评论
收起资源包目录
gzip静态库c++ builder 2007.rar (68个子文件)
gzip静态库c++ builder 2007
adler32.c 5KB
Release
adler32.obj 1KB
compress.obj 578B
inffast.obj 2KB
gzip.pch 2.23MB
gzip.#00 12KB
gzip.lib 69KB
inflate.obj 11KB
uncompr.obj 497B
gzip.#04 15KB
gzio.obj 6KB
inftrees.obj 3KB
gzip.#03 12KB
deflate.obj 10KB
gzip.#02 4KB
infback.obj 7KB
crc32.obj 11KB
zutil.obj 2KB
gzip.#01 15KB
gzip.#05 16KB
trees.obj 12KB
uncompr.c 2KB
zlib.h 66KB
__history
uncompr.c.~1~ 2KB
trees.c.~1~ 44KB
zconf.in.h 10KB
deflate.h 12KB
inflate.c 49KB
trees.h 8KB
trees.c 44KB
inftrees.c 14KB
infback.c 22KB
compress.c 3KB
crc32.c 13KB
inffixed.h 6KB
inffast.h 418B
gzio.c 31KB
zlib.def 829B
inffast.c 13KB
zutil.h 7KB
crc32.h 30KB
zconf.h 10KB
inflate.h 6KB
Debug
adler32.obj 4KB
gzip.BAK 168KB
compress.obj 2KB
inffast.obj 7KB
gzip.#00 12KB
gzip.lib 168KB
inflate.obj 29KB
uncompr.obj 1KB
gzip.#04 15KB
gzio.obj 21KB
inftrees.obj 5KB
gzip.#03 12KB
deflate.obj 30KB
gzip.#02 4KB
infback.obj 18KB
crc32.obj 15KB
zutil.obj 3KB
gzip.#01 15KB
gzip.#05 16KB
trees.obj 31KB
gzip.cbproj 9KB
gzip.cbproj.local 474B
inftrees.h 2KB
deflate.c 64KB
zutil.c 7KB
共 68 条
- 1
maohailin_
- 粉丝: 2
- 资源: 8
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功
- 1
- 2
- 3
前往页