How to use HyperTerminal to Capture the
running information of DVB-T?
1. First, Connect the PC and DVB-T platform with the serial communication
cable as same as Software Upgrade process.
Serial cable between PC and STB, TXD,RXD should be crossed(i.e. DB9 cable
pin2&3),see attached picture for detail.
2. Establish the communications between your PC and the DVB-T platform by
Click Start -> Programs -> Accessories -> Communications
-> HyperTerminal. “Hypertrm.exe” will be called, and HyperTerminal
screen opens.
3. Select cancel if the Location Information dialog box is displayed
until you see Connection Description opens.
4. Type any name (for example. DVBT ), select an icon, and then press OK.
5. Select the correct communications port (COM1, COM2, etc), and press OK.
6. The communications port properties opens.